Blueto oth v4.0 3.7 v ma mad e in chi na, 7 v 0 ma, Bluetooth headset
1 X 44 key panel. 1 X IR controller. 1 X 12V 5A 60W. 5.5 X 2.5 2-prong Adapter. 1 X User manual. 5050 RGB 300 LED Strip Light 44 Key. Model NO.:TT-SL007 / 008. Thank you for purchasing TaoTronics 5050 RGB 300 LED Strip Light. Please read this guide carefully as it explains many important operating procedures.
Aug 19, 2016 A 2 FOR 1 CONNECTION: Two Bluetooth headphones or speakers can pair at once so children can watch in silence and give parents a needed break. Note: aptX Low Latency does NOT support Dual Pair mode. MAKE IT TWO: Upgraded 2-in-1 Bluetooth V4.1 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. ALWAYS ON: TaoTronics Bluetooth 4.1 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use – enjoy your favorite wireless content all the time. Free 2-day shipping. Buy taotronics bluetooth 5.0 transmitter and receiver, 2-in-1 wireless 3.5mm adapter (aptx low latency, 2 devices simultaneously, for tv/home sound system) at Walmart.com. Set time and date after your bar code 1 2 1 then 2 15. UPC-A omit the first digit 16. UPC-E omit the first digit 17. Delete five and the last three 18. Add 4 zeros in front of bar code 19. TaoTronics official website offers True Wireless headphones, noise cancelling headphones, sports headphones, a TV sound bar and PC sound bar, humidifiers, LED lamp, therapy lamp, desk lamp as well as floor lamp at factory direct prices.
When performing some specific actions, the headset will give voice notification as following:
Status /
Action
LED indicator
Turn ON
Blue light flash 3 times
Turn OFF
Red light is on for 2 seconds
Headset has
been turned
ON
Blue light flash once every
7 seconds
In pairing
mode /
Searching
Blue and red light flashing
alternatively
Paired and
working
Blue light flash once
every 7 seconds
Charging
Red light is on constantly
Fully
charged
Blue light is on constantly
Battery low
Red light flash once every 20
seconds with a warning tone
Streaming music
Once you have established Bluetooth connection with smart phone or other stereo music device, use the music player feature to listen to stereo music. Adjust the volume with the volume
Basic phone call actions
Action
Answer a call Press the multi-function
button once
Press the multi-function
button once
End a call
Adjust the
volume
Mute /
resume a call
Press the volume + or –
button
Headset Control
During a call, double press
the multi-function button
Redial last
number
Double press the
multi-function button
Reject an
incoming call
Press and hold the
multi-function button for 3
seconds
Call waiting Press the multi-function
button to answer the second
call and put the first call on
hold
Call switching
Power ON
Press the multi-function
button twice
Slide the power button to ON
position
Power OFF Slide the power button to
OFF position
Outside
Bluetooth
range
Out of range
Mute call
Mute on
Resume call Mute off
Action
Incoming call Announcing incoming call
number
Hello
Power on
Power off
Pairing
Goodbye
Voice notification
Pairing
Successfully
paired
Connected
Bluetooth
disconnected
Disconnected
Battery level
low
Battery low
Specifications
32°F – 104°F(0°C to 40°C)
Size
Weight
Working Temp
2.20 x 0.75 x 0.35 inch 0.02 lbs
Bluetooth
Version
Bluetooth
Profile
A2DP, HFP (1.6), HSP (1.2)
2.4 GHz
Frequency
Range
Charging
time
Up to 33 feet / 10 meters
(in open space)
4.0
2 hours
Talking time
Up to 5 hours
Standby time Up to 140 hours
Compatible
device
Smartphone, iPad, tablets,
laptops, PC (with Bluetooth
connectivity), Bluetooth
music player, Bluetooth
transmitter
Patent
number
Model
Number
201230166945.2
J02
Input power
5 V (via Micro-USB port)
Battery type Rechargeable
Li-Polymer (80 mAh)
Charging
The J02 Bluetooth headset is partially charged at the factory. Please make sure that you fully charge it before using it for the first time. To charge the unit: 1. Plug the micro-USB end of the
charging cable into the headset.
2. Plug the USB end of the
charging cable to any USB charger or USB port from your computer.
3. Red LED indicator will be ON
when charging is in progress.
4. When charging is finished, the
LED indicator will turn blue.
Normally it takes 2 hours to fully charge the battery from empty. We recommend charge the headset at least once every month
Blueto
oth V4.0
3.7
v --
- 80
mA
Mad
e in
Chi
na
Nikon p530 manual download. Download File Format.exe into the folder created in Step 1. Create a folder on the computer hard disk and name it as desired.
①
Multi-function button
⑤
Mic
⑥
LED indicator
⑦
Power on
⑧
Power off
②
Charging port
③
Volume +
④
Volume -
1 x J02 Bluetooth Headset
1 x USB charging cable
1 x micro-USB headphone extension
2 x ear hook
3 x earbud tip
1
7 8
Blu
etooth V
4.0
3
.7
v
--- 8
0
mA
Made
in
Chin
a
3
4
2
6
5
Pairing to two smartphones
The Bluetooth headset is capable of simultaneously connect to two smartphones. To do this: • Follow the instructions in the
“Pairing” section to connect the Bluetooth headset to smartphone 1.
• Once connection is successfully
established, disable the Bluetooth function on smartphone 1, and turn off the Bluetooth headset.
• Follow the instructions in the
“Pairing” section to connect the Bluetooth headset to smartphone 2.
• Once connection between
smartphone 2 and the Bluetooth headset is established, go back to smartphone 1, and turn on the Bluetooth function on smartphone 1.
• The Bluetooth headset (J02)
should appear in the connection list, simply tab it to connect if it doesn’ t connect automatically.
You have now maintained an active connection with 2 smartphones at
the same time. You can now make / answer phone calls from both smartphones. Note: You can also pair two
Bluetooth devices with the headset at the same time.
Connection priority
When connected to two smartphones simultaneously, the last phone used for call /answer calls will have higher priority. For example, an incoming call is answered with smartphone 1. During the call, a second call is coming to smartphone 2. Press the multi-function button once will answer call 2 with smartphone 2. But call 1 on smartphone 1 is still on. When call 2 is ended (by operation from smartphone 2), the headset will return to call 1 on smartphone 1.
Reconnecting
Once you have successfully paired the headset with a Bluetooth device, you no longer need to bring
both into pairing mode for them to pair again. Simply turn on both device, and they should automatically connect with each other. For some smartphones, you may have to select the Bluetooth headset from the list of available devices, and tab to connect.
Pairing with PC
Before connecting to your PC,
please make sure that: • Your PC has Bluetooth function, or
have Bluetooth dongle installed and working.
• Download and install the latest
Bluetooth driver for your operation system.
To connect the Bluetooth
headset with your PC: • Turn on the Bluetooth headset by
sliding the power button (Blue light flash 3 times when turned on).
• Press and hold the function button
until you see the LED indicator flashing in red and blue.
Warranty
1 year parts and labor warranty. If the headset becomes defective due to manufacture fault, we will fix it or replace it free of charge. However, customer is liable for the shipping cost past 3 months from original purchase date. We do not cover damage caused by the following: • any abusive use and destruction • normal ware and aging • over exposure to chemical,
heat, moisture, fire, and radioactive substance
• natural disaster This warranty does not apply to any second hand purchased headset.
FAQ / Trouble shooting
Q: The connection is not stable
and cuts out intermittently.
A: While the range of Bluetooth is
33 feet (10 meters), the optimal range for Bluetooth stereo transmission is 5 – 10 feet (or 3 meters). Bluetooth signal is prone to loss caused by impenetrable objects like walls and ceilings. Additionally, other radio transmitting device in the area can also interfere with Bluetooth transmission. Please make sure there are no objects between the headset and your Bluetooth device, as well as check out any other radio transmitting device within range.
Q: I have turned the Bluetooth
headset on, but it is not connecting to my smartphone / music player.
A: In order for both devices to
connect, you will need to bring both to pairing mode. Simply
turn on any device is not going to make them connect. Please follow the instruction in the “pairing” section.
Q: I have established connection
with my smartphone / music player, but I am not hearing any sound.
A: Please make sure that you
turn up the volume of both devices. Some smartphone requires you to setup the Bluetooth headset as an audio output device before sound is transmitted. Please see the instruction of your smartphone for details. If you are using a music player or other Bluetooth device, please make sure it supports A2DP stereo music profile.
Q: I cannot hear the headset very
clearly.
A: Please adjust the volume on
your phone and headset. Make sure there is no source of interference nearby. Stay
close to your smartphone / music player.
Q: The other person cannot hear
my call clearly.
A: Make sure your phone is not
connected to another Bluetooth device. Bring your smartphone closer to you and reposition the headset.
Q: Where can I get more
technical support?
A: Please email us at
[email protected]. Make sure you include your purchase order ID for reference purpose.
Maintenance
• Battery care: make sure you
turn off the headset when it is not in use. If you have not used the headset for more than 1 month, please make sure you fully charge it before use.
• Cleaning: use a soft, dry cloth
the wipe the surface carefully.
Model number:J02
Thank you
We appreciate your choice of QCY “Jack” J02 Bluetooth headset exclusively distributed by TaoTronics. Please read this manual carefully. Make sure you understand all information before using this headset. If you need any assistance, please feel free to contact us.
Feature
• Cutting-edge Bluetooth 4.0
technology
• Easy set up in minutes with most
Bluetooth devices
• Up to 5 hours of talk time or 140
hours of standby with a single charge
• Excellent sound quality with latest
CVC 6.0 Echo/Noise cancellation technology for better clarity
• Works with music players, smart
phones, tablets, etc.
• Easy to use with convenient
controls
• Music control options with A2DP
profile
• Voice notification • Headset battery meter display on
iPhone/iPad
• Multipoint support connection with
2 devices at the same time
• Comfortably fit either ear
Package Content
Buttons and connections
We recommend charge the headset at least once every month even when the battery is not fully empty. Note: You cannot use the headset
while it is charging
Assemble the headset
The J02 headset comes with 2 ear hook and 3 earbud tips. These accessories are interchangeable to best fit your wearing style.
Wearing the headset
Taotronics Wireless 2 In 1 Adapter User Manual Instructions
1. Place the headset into your ear,
pointing straight down.
2. Then twist the headset upwards
so it points directly at your mouth.
3. You should feel the headset
fitting securely in your ear.
Pairing
In order to pair the Bluetooth headset with your smartphone or any other device, you will need to bring it to pairing mode first. Please follow the following steps: 1. Turn on the headset by sliding
the power button.
2. Press and hold the multifunction
button for 5 seconds or until you see the LED indicator flashing in red and blue
alternatively.
3. Once the LED indicator is
flashing in red and blue, the headset is now in pairing mode.
If you are using a smartphone or tablet, you should now be able to
discover the Bluetooth headset (J02) listed as available device for connection. Please follow the instruction of your smart phone or tablet to connect to the Bluetooth headset. If your device is asking for a password, please enter “0000”. If you are using a Bluetooth transmitter or other device without screen, please follow the instructions of your device to bring it to pairing mode. Once the two devices are in pairing mode, they should connect automatically. Please make sure to bring both
devices next to each other or
within 3 feet when pairing. Note: Please make sure to keep
the device away from other Bluetooth or radio transmitting device during pairing stage, as interference may cause pairing failure.
• Go to Setting -> Bluetooth Setting
-> Search Bluetooth Device.
• The Bluetooth headset should
appear as an available device under the name “J02”.
• Click on connect and enter PIN
“0000” if required.
Reset to factory default
setting
Connect the headset to a charging source and make sure it is charging (see section “Charging” for more details). When the device is in charging mode, press and hold the multi-function button until you see the red LED indicator flash 3 times. This will reset the headset to factory default setting.
Understanding the LED
indicator
How To Pair Taotronics Wireless 2 In 1 Adapter
button on the side. Press the function button once to pause, and press it again to resume.Press and hold the volume button to change to previous track or next track. Note:for your own health, please
do not listen to music on max volume for extended period of time. We recommend take 1 short break every 30 minutes to protect your hearing ability.
Do not use liquid or sprays.
• To clean the tip: Gently pull out
the tip from the earpiece. Wash and rinse with water only. Make sure it is completely dry before re-attaching to the earpiece.
• To clean the wire mesh on the
earpiece: Gently pull out the tip. Lightly brush the mesh with a soft, dry cloth. Avoid pressing on the mesh.
Customer Support Contact
For additional assistance or warranty cover claim, please contact us: E-mail: [email protected] (all enquires) Phone: 1-888-456-8468 # 4 (9:00 am – 6:00 pm PST, Monday to Friday)
Trademark and license
agreement
Bluetooth
®
The Bluetooth word mark and logos are owned by the Bluetooth
®
SIG, Inc. and any use
Samsung galaxy folder 2 sm-g1600. Samsung Galaxy Folder SM-G1600 Galaxy Folder 2 manual user guide is a pdf file to discuss ways manuals for the Samsung Galaxy Folder SM-G1600.In this document are contains instructions and explanations on everything from setting up the device for the first time for users who still didn’t understand about basic function of the phone.
Taotronics Wireless Transmitter For Tv
of such trademark for this product is under license. Other trademark and trade names are those of their respective owners.
QCY
®
QCY
®
and its logo are registered
and owned by QCY Inc. QCY
®
has agreed to grant TaoTronics Inc, and Sunvalleytek Inc. sole distribution rights for its “Jack” J02 Bluetooth headset in North America. Other distributors are prohibited from operating retail, wholesale, and any commercial activities in North America for QCY
®
“Jack” J02 Bluetooth
headset.
- 5 -
- 6 -
- 7 -
- 8 -
- 9 -
- 10 -
- 1 -
- 2 -
Taotronics Wireless 2 In 1 Adapter User Manual Download